Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance.

The universally applicable lab oven is applicable for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.

Technical Details



Working temperature range:           at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient                                                              temperature to +300 °C

Setting accuracy temperature:       up to 99.9 °C: 0.1 / from 100 °C: 0.5

Setting temperature range:            +20 to +300 °C

Temperature sensor:                      1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language setting:                          German, English, Spanish, French, Polish, Czech, Hungarian

ControlCOCKPIT:                            SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-                                                              definition TFT-colour display

Timer:                                              Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT:                   the process time does not start until the set temperature is reached

Calibration:                                      three freely selectable temperature values

Adjustable parameters:                   temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time                                                                zones, summertime/wintertime


Fan:                                                 forced air circulation by quiet air turbine, adjustable in 10 % steps

Fresh air:                                         Admixture of pre-heated fresh air by electronically adjustable air flap

Vent:                                                vent connection with restrictor flap


Documentation:                               programme stored in case of power failure

Programming:                                 AtmoCONTROL software for reading out, managing and organising the data logger via                                                                Ethernet interface (temporary trial version can be downloaded). USB stick with                                                                            AtmoCONTROL software available as accessory (on demand).

Stainless steel interior

Dimensions:                                    w(A) x h(B) x d(C): 1040 x 720 x 600 mm (d less 39 mm for fan)

Interior:                                            easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with                                                                    integrated and protected large-area heating on four sides

Volume:                                           449 l

Max. number of internals:               8

Max. loading of chamber:              300 kg

Max. loading per internal:              30 kg

Textured stainless steel casing

Dimensions:                                    w(D) x h(E) x d(F): 1224 x 1247 x 784 mm (d +56mm door handle)

Installation:                                     on lockable castors

Housing:                                         rear zinc-plated steel

Electrical data

Voltage Electrical:                           load 400 V, 3 phases, 50 Hz approx. 5800 W

Ambient conditions

Set:                                                 UpThe distance between the wall and the rear of the appliance must be at least 15 cm.                                                               The clearance from the ceiling must not be less than 20 cm and the side clearance from                                                             walls or nearby appliances must not be less than 5 cm.

Altitude of installation:                    max. 2,000 m above sea level

Ambient temperature:                   +5 °C to +40 °C

Humidity rh:                                   max. 80 %, non-condensing

Overvoltage category:                   II

Pollution degree:                            2

Packing/shipping data

Transport information:                    The appliances must be transported upright

Customs tariff number:                  8419 8998

Country of origin:                           Federal Republic of Germany

WEEE-Reg.-No.:                            DE 66812464

Dimensions approx incl. carton:   w x h x d: 1330 x 1440 x 1050 mm

Net weight:                                    approx. 161 kg

Gross weight carton:                     approx. 227 kg


Temperature control:                     adjustable electronic overtemperature monitor and mechanical temperature limiter TB,                                                                protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above                                                              nominal temperature

Autodiagnostic system:                for fault analysis

Standard equipment

Internals:                                       2 stainless steel grid(s), electropolished

Works calibration certificate:        Calibration at +160°C

Door:                                             fully insulated stainless steel doors with 2-point locking (compression door lock)

For any inquiries, please fill in the following contact form:

  • Facebook Social Icon